Key Features

• Available in wattages of 100W, 150W, 210W, and 230W
• Power & CCT Tunable
• Set up for Plug & Play Bluetooth Networked Controls or motion sensor
• Standard 120-277V universal line voltage
• Standard 0-10V dimming controls
• High efficacy of up to 148 lm/W
• Hassle-free 5-year warranty

This premium quality fixture is available with standard Power & CCT Adjustment Controls easily accessible from the fixture housing, allowing power adjustments to 100%, 80%, 60%, and 40%, and CCT adjustments to 5000K or 4000K. Additionally, GKOHBG8 is fully compatible with our Plug & Play Bluetooth Networked Controls, allowing large groups of lights to be programmed and controlled at once for more complex lighting requirements and making this light eligible for additional energy rebates.

Other options include a Plug & Play multi-level motion sensor for additional energy savings, and an external emergency battery backup that can provide up to 90 minutes of emergency operation in the case of a power outage. Pendant and conduit mounting options are available out of the box, with an optional Adjustable Surface Mounting Bracket providing additional mounting versatility by allowing the angle of the light to be precisely aimed where required.

Do you have questions about GKOHBG8, or are not sure which light is right for your project? Our LED product experts are ready to answer your questions. Contact us at 630-993-9449 or at will@jeelighting.com and we’ll be happy to help you with your project!

The post Power & CCT Tunable High Bay With Plug & Play Bluetooth appeared first on GKOLED.

Angle Adjustment Adaptor:

This unique, versatile adaptor may be used in combination with an Area Light or Flat Flood Light equipped with a pole or wall mount to vastly expand the range that the light may be aimed to. Fixtures using this adaptor may be adjusted horizontally, vertically, and any combination of the two for precise aiming of the direction of the light.

4” and 5” Square and Round Pole Mounts:

These mounting brackets are designed to fit on the top of standard 4” or 5” nontapered square or round poles, and are compatible with Area Lights and Flood Lights equipped with a slipfitter mount. This reliable solution allows for a single light to be mounted on the top of a pole, as well as for the direction of the light output to be adjusted if necessary.

Double, Triple, and Quad Horizontal Tenon Adaptors:

Commonly utilized in parking lot lighting, these tenon adaptors enable multiple Area Lights or Flood Lights equipped with a slipfitter mount to be installed on the top of a pole, as well as for the direction of the light output to be adjusted if necessary. These adaptors are designed to fit over our 4” and 5” Square and Round Pole Mount brackets in order to fit on the top of standard 4” or 5” nontapered square or round poles.

90° Wall Mount Bracket:

This versatile mounting arm is used to attach an Area Light or Flood Light equipped with a slipfitter to almost any surface, such as a roof, wall, or wood pole. This bracket is a great solution when it is necessary to mount a fixture vertically, but not on the very top of a pole.

Mid-Pole Bracket:

This versatile bracket is used to attach an Area Light or Flood Light equipped with a slipfitter mount to a vertical surface and aim the fixture from a horizontal base position.

Adaptor For Yoke Fixtures:

In the case that a fixture is not available with a slipfitter mount but comes with a trunnion or a yoke mount, this adaptor allows it to be used with other mounting brackets and expand its mounting capabilities.

Still not sure which mounting accessory is best for your commercial LED lighting project? You can find more information on our brackets and tenons here, or our experienced, knowledgeable sales team is always available for a consultation. Contact us at 516-670-6888 or at will@jeelighting.com and let us help you with your next job!

The post Which Mounting Bracket Is Right For Your Project? appeared first on GKOLED.

Which bracket or adaptor is right for your project? Below is a comprehensive list of the mounting accessories that we stock, along with their intended use. Please note that most of these products are intended to be used with a fixture equipped with a Slipfitter mount.

This adaptor bracket is used to install a fixture equipped with a Slipfitter Mount on the top of a 4” square pole. A fixture mounted to this bracket can be adjusted both vertically and horizontally.

This adaptor bracket is used to install a fixture equipped with a Slipfitter Mount on the top of a 5” square pole. A fixture mounted to this bracket can be adjusted both vertically and horizontally.

This adaptor bracket is used to install a fixture equipped with a Slipfitter Mount on the top of a 4” round pole. A fixture mounted to this bracket can be adjusted both vertically and horizontally.

This adaptor bracket is used to install a fixture equipped with a Slipfitter Mount on the top of a 5” round pole. A fixture mounted to this bracket can be adjusted both vertically and horizontally.

Intended for Tier 1 or Tier 2 Flat Flood Lights equipped with a Yoke Mount, this adaptor enables the fixture to be mounted onto a 2 3/8” O. D. tenon, making it compatible with our other mounting accessories.

Intended for Tier 1 or Tier 2 Flat Flood Lights equipped with a Slipfitter Mount, this versatile bracket allows a Flat Flood Light to be attached to almost any flat surface, such as a wall, roof, or wood pole. 3/8” bolts are suggested for installation (not included).

This bracket is used to install a GKOLED fixture equipped with a Slipfitter Mount onto the side of a square pole.

Two fixtures equipped with a Slipfitter Mount can be mounted to this bracket and adjusted horizontally. The bracket is designed to mount over a 2 3/8” O.D. vertical tenon and is compatible with our square and round pole mount adaptors.

Two fixtures equipped with a Slipfitter Mount can be mounted to this bracket and adjusted horizontally. The bracket is designed to mount over a 2 3/8” O.D. vertical tenon and is compatible with our square and round pole mount adaptors.

Three fixtures equipped with a Slipfitter Mount can be mounted to this bracket and adjusted horizontally. The bracket is designed to mount over a 2 3/8” O.D. vertical tenon and is compatible with our square and round pole mount adaptors.

Three fixtures equipped with a Slipfitter Mount can be mounted to this bracket and adjusted horizontally. The bracket is designed to mount over a 2 3/8” O.D. vertical tenon and is compatible with our square and round pole mount adaptors.

Four fixtures equipped with a Slipfitter Mount can be mounted to this bracket and adjusted horizontally. The bracket is designed to mount over a 2 3/8” O.D. vertical tenon and is compatible with our square and round pole mount adaptors.

If you are still not sure which mount or mounting accessory would be most effective for your situation, our experienced sales team would be happy to make a recommendation. Contact us at 516-670-6888 or at will@jeelighting.com and tell us about your LED lighting project!

The post Area & Flat Flood Light Mounting Options: Part 2 appeared first on GKOLED.

Round/Square Pole Mount

 
When an Area Light needs to be mounted to the side of a pole at a perfect 90° angle, this mount is the easiest and most straightforward solution. By default, the Pole Mount is intended to be used with square poles, but it also comes with an adaptor plate that enables it to be installed on a round pole. The arm includes a knockout for installing a photocell or motion sensor.

Slipfitter Mount

 
The most common mount for Area Lights due to its versatility, this mounting option is also available for our Flat Flood Lights. The Slipfitter Mount allows the angle of the fixture to be adjusted from 90° to 180°, enabling precise aiming of the light output. A standard 2 3/8” opening at the bottom of the mount enables the light to be installed on the top of a pole or used in conjunction with mounting accessories equipped with a 2 3/8” tenon.

Trunnion Mount

 
Available for our Tier 1 250W and 300W Flat Flood Lights, this convenient mount easily attaches to a flat surface and enables precise aiming of the fixture to one of several fixed angles.
 
 

Wall Mount

 
Available for our Area Lights and Flat Flood Lights, this mount allows straightforward direct mounting of a fixture using ½” conduit wiring, as well as standard junction box mounting. The arm includes a knockout for installing a photocell or motion sensor.
 
 

Yoke Mount

 
Available for our Flat Flood Lights, this convenient mount easily attaches to a flat surface and enables precise aiming of the fixture to one of several fixed angles.

If you are still not sure which mount would be most effective for your situation, our experienced sales team would be happy to make a recommendation. Contact us at 516-670-6888 or at will@jeelighting.com and tell us about your LED lighting project!

The post Area Light & Flat Flood Light Mounting Options: Part 1 appeared first on GKOLED.